微针鳍散热器结构参数模拟及优化
CSTR:
作者:
作者单位:

(中国石油大学(华东)1. 储运与建筑工程学院;2. 新能源学院, 山东 青岛 266580)

作者简介:

王志敏(1996-),男,硕士研究生,主要研究方向为材料强度及其可靠性;

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(11972376);山东省自然科学基金项目(ZR2019MA007);中央高校基本科研专项基金项目(19CX02032A).通信作者:叶贵根E-mail:yegg@upc.edu.cn


Simulation and Optimization of Structural Parameters of the Micro Pin-Fin Radiator
Author:
Affiliation:

(China University of Petroleum 1. College of Pipeline and Civil Engineering;2. College of New Energy, Qingdao 266580, CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过数值模拟研究了交错式微针鳍散热器的散热效应,分析了针鳍阵列间距和高度对散热器壁温和压降的影响。结果表明,压降随针鳍间距和针鳍高度的减小而呈非线性增加;壁温随针鳍间距的增大而上升,随针鳍高度的增加则呈现出波动趋势。基于上述研究,进一步利用响应表面近似法对微针鳍的横向间距、纵向间距和高度进行了优化,优化后压降最大可降低61.11%。

    Abstract:

    The heat dissipation effect of the interleaved micro-pin-fin heat sink was studied by numerical simulation, and the influence of the array spacing and height of the pin fins on the wall temperature and pressure drop of the heat sink was studied. Experimental results indicate that the press drop increases nonlinearly with the decreasing array spacing and height of the pin fins, while the wall temperature increases with the increase of the pin fin spacing, but it shows a fluctuation trend with the increase of the pin fin height. Based on the above research, it further optimizes the lateral spacing, longitudinal spacing and height of the microneedle fins with the method of response surface approximation. The pressure drop can be reduced by a maximum of 61.11% after optimization.

    参考文献
    相似文献
    引证文献
引用本文

王志敏,叶贵根,薛世峰,巩亮.微针鳍散热器结构参数模拟及优化[J].半导体光电,2020,41(4):535-541. WANG Zhimin, YE Guigen, XUE Shifeng, GONG Liang. Simulation and Optimization of Structural Parameters of the Micro Pin-Fin Radiator[J].,2020,41(4):535-541.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-04-17
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-08-07
  • 出版日期:
文章二维码