高陡度深型光学元件主动平滑技术研究
CSTR:
作者:
作者单位:

(1. 中国科学院光电技术研究所, 成都 610209;2. 中国科学院大学, 北京 100049)

作者简介:

张 穗(1997-),男,广东省广州市人,硕士研究生,主要研究方向为大偏离量非球面元件中频误差主动平滑装备及技术、超高精度精密光学元件制造装备设计;

通讯作者:

中图分类号:

TH161

基金项目:


Research on Active Smoothing Technology of High Gradient and Deep Optical Elements
Author:
Affiliation:

(1. Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, CHN;2. University of Chinese Academy of Sciences, Beijing 100049, CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出一种针对高陡度非球面元件表面中频误差的主动平滑技术。通过构建离轴高陡度非球面平滑加工接触模型,获得加工过程中的不吻合度分布,设计主动平滑工具。采用有限元分析方法模拟主动平滑过程中磨盘材料、厚度及结构之间的关系,获得优选的主动平滑参数。实验结果验证了计算模型的准确性及主动平滑技术对于高陡度非球面元件的中频误差具有更好的平滑效果。

    Abstract:

    An active smoothing technology for the surface MSF error of high steepness aspheric elements was proposed. By constructing the off-axis machining contact model of aspheric element, the distribution of misalignment in the machining process was obtained, and the active deformation grinding disc was designed. The finite element analysis method was used to simulate the relationship between the material, thickness and structure of the grinding plate in the process of active smoothing, and the optimal active smoothing parameters were obtained. The experimental results verify that the accuracy of the calculation model and the active smoothing technology play a better smoothing effect on the MSF error of high steepness aspheric components.

    参考文献
    相似文献
    引证文献
引用本文

张穗,王佳,王朝阳,邓永红,侯溪.高陡度深型光学元件主动平滑技术研究[J].半导体光电,2022,43(2):358-362. ZHANG Sui, WANG Jia, WANG Zhaoyang, DENG Yonghong, HOU Xi. Research on Active Smoothing Technology of High Gradient and Deep Optical Elements[J].,2022,43(2):358-362.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-09-17
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-05-09
  • 出版日期:
文章二维码