基于MEMS技术的仿生纤毛风速传感器的设计和仿真
CSTR:
作者:
作者单位:

(上海交通大学 1. 微米/纳米加工技术国家级重点实验室;2. 微纳电子学系, 上海 200240)

作者简介:

卢建勋(1997-),男,硕士研究生,主要研究方向为仿生微传感器设计;

通讯作者:

中图分类号:

TP212.1

基金项目:

国家自然科学基金项目(61871266);上海市科委专业技术服务平台项目(19DZ2291103).*通信作者:刘武E-mail:liuwu@sjtu.edu.cn


Design and Simulation of Bioinspired Flow Sensor Based on MEMS Technology
Author:
Affiliation:

(1. National Key Laboratory of Science and Technology on Micro/Nano Fabrication;2. Dept. of Micro/Nano Electronics, Shanghai Jiaotong University, Shanghai 200240, CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计了一种可以实现二维风速测量的电容式纤毛传感器,其特点为通过差分电容检测流速,传感器运动结构所对应的背硅被完全刻蚀。采用有限元分析软件,通过流体-固体-静电场的多物理场仿真,分析得到了传感器的差分电容与风速的变化关系。结合电容传感器AD7746的理论精度,计算得出传感器的风速灵敏度为0.25mm/s。此外,设计了基于SOI硅片的传感器微加工制备的工艺流程。

    Abstract:

    A capacitive artificial hair sensor that enables two-dimensional wind velocity measurement was designed. The sensor detected flow velocity by differential capacitance, and the handle layer of wafer corresponding to the sensor motion structure was completely etched. The relationship between the differential capacitance of the sensor and the wind velocity was analyzed and obtained by multi-physics field simulation of fluid-solid-electrostatics field using finite element analysis software. With the theoretical accuracy of the capacitance sensor AD7746, the wind velocity sensitivity of the sensor is calculated to be 0.25mm/s. In addition, a process flow for the microfabrication of the sensor based on SOI wafer was designed.

    参考文献
    相似文献
    引证文献
引用本文

卢建勋,周南彦,刘武.基于MEMS技术的仿生纤毛风速传感器的设计和仿真[J].半导体光电,2022,43(6):1075-1079. LU Jianxun, ZHOU Nanyan, LIU Wu. Design and Simulation of Bioinspired Flow Sensor Based on MEMS Technology[J].,2022,43(6):1075-1079.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-06-18
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-02-07
  • 出版日期:
文章二维码