基于开口圆环结构的太赫兹分束器设计
DOI:
CSTR:
作者:
作者单位:

重庆邮电大学

作者简介:

通讯作者:

中图分类号:

基金项目:


Design of terahertz beam splitter based on open ring structure
Author:
Affiliation:

College of Photoelectronic Engineering, Chongqing University of Posts and Telecommunications

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文提出了一种基于开口圆环结构的太赫兹分束器,其结构单元为典型的金属-介质-金属结构,顶层金属图案由开口圆环组成,底层为连续金属板。通过改变开口圆环的开口大小和半径大小排列构成了88的相位梯度超表面。当太赫兹波分别沿-z轴方向和+z轴方向垂直入射时,电磁波会被分成沿x,y轴对称但能量分布不同的四束波,两种入射模式能够得到两种不同的分束比。在0.7 THz时,太赫兹波分别沿-z轴方向和+z轴方向垂直入射时,其分束比分别为0.8:1和1.9:1,实现对分束比的调谐。此分束器具有体积小、成本低的优点,可应用于太赫兹通信、太赫兹成像和太赫兹隐身等领域。

    Abstract:

    In this paper, a terahertz beam splitter based on open ring structure is proposed. Its structural unit is a typical metal-dielectric-metal structure. The top metal pattern is composed of an open ring, and the bottom layer is a continuous metal plate. The 8×8 phase gradient metasurface is formed by changing the opening size and radius of the opening ring. When the terahertz wave is vertically incident along the -z axis and +z axis respectively, the electromagnetic wave will be divided into four beams that are symmetrical along the x and y axes but have different energy distributions. The two incident modes can obtain two different beam splits. Compare. At 0.7 THz, when the terahertz wave is vertically incident along the -z axis direction and the +z axis direction, the beam splitting ratios are 0.8:1 and 1.9:1, respectively, realizing the tuning of the beam splitting ratio. This beam splitter has the advantages of small size and low cost, and can be applied in the fields of terahertz communication, terahertz imaging and terahertz stealth.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2023-09-25
  • 最后修改日期:2023-09-25
  • 录用日期:2023-10-07
  • 在线发布日期:
  • 出版日期:
文章二维码