一种用于光隔离IGBT栅极驱动的智能型LED驱动电路
CSTR:
作者:
作者单位:

(1. 电子科技大学 集成电路科学与工程学院, 成都 611731;2. 重庆光电技术研究所, 重庆 400060)

作者简介:

通讯作者:

中图分类号:

TN322.8

基金项目:


Intelligent LED Driver Circuit Based on Bipolar Technology for Optical Isolated IGBT Gate Driver
Author:
Affiliation:

(1. School of Integrated Circuit Science and Engineering, University of Electronic Technology, Chengdu 611731, CHN; 2.Chongqing Optoelectronics Research Institute, Chongqing 400060, CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用双极型工艺设计了一种智能型高速LED驱动电路,可用于光隔离IGBT栅极驱动芯片的输入驱动。该设计采用一种新型逻辑门结构来实现信号传输、故障反馈以及外部置位等功能,同时达到降低信号传输延迟时间的目的。测试结果表明,在常温条件下,LED驱动电路的输入信号传输延迟时间为70ns,复位信号有效到故障消除的延迟时间为4.59μs。所设计的驱动电路能够满足光耦隔离IGBT栅极驱动芯片的使用要求。

    Abstract:

    In this study, an intelligent high-speed LED driver circuit is designed using bipolar technology, which can be used as the input driver of an optical isolated IGBT gate driver chip. This design uses a new logic gate structure to realize the functions of signal transmission, fault feedback, and external setting and to reduce the delay time of signal transmission. The test results show that under normal temperature conditions, the input signal transmission delay time of the LED driver circuit is 69.99ns, and the delay time from the effective reset signal to fault elimination is 4.59μs. The designed driver circuit can meet the requirements of the optocoupler isolated IGBT grid driver chip.

    参考文献
    相似文献
    引证文献
引用本文

徐鉴,邓光平,蒲熙,刘昌举,张继华.一种用于光隔离IGBT栅极驱动的智能型LED驱动电路[J].半导体光电,2024,45(1):79-83. XU Jian, DENG Guangping, PU Xi, LIU Changju, ZHANG Jihua. Intelligent LED Driver Circuit Based on Bipolar Technology for Optical Isolated IGBT Gate Driver[J].,2024,45(1):79-83.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2023-09-08
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-04-03
  • 出版日期:
文章二维码