基于石墨烯涂层高灵敏SPR-PCF大气污染浓度检测传感器及特性研究
CSTR:
作者:
作者单位:

(1. 华北电力大学 电气与电子工程学院, 河北 保定 071003;2. 华北电力大学 河北省电力物联网技术重点实验室, 河北 保定 071003;3. 华北电力大学 保定市光纤传感与光通信技术重点实验室, 河北 保定 071003;4. 国网河北省电力公司保定供电分公司, 河北 保定 071003)

作者简介:

赵丽娟(1981-),女,博士,教授,主要从事光纤传感与光纤通信方面的研究;

通讯作者:

中图分类号:

TN253

基金项目:

国家自然科学基金项目(62171185,62273146);河北省自然科学基金资助项目(E2020502010);河北省省级科技计划资助(SZX2020034).通信作者:徐志钮


Graphene Coated Highly Sensitive Surface Plasmon Resonance-Photonic Crystal Fiber Sensor for Detecting Air Pollutant Concentration
Author:
Affiliation:

(1. School of Electrical and Electronic Engineering, North China Electric Power University, Baoding 071003, CHN;2. Hebei Key Laboratory of Power Internet of Things Technology, North China Electric Power University, Baoding 071003, CHN;3. Baoding Key Laboratory of Optical Fiber Sensing and Optical Communication Technology, North China Electric Power University, Baoding 071003, CHN;4. Baoding Electric Power Supply Company, State Grid Hebei Electric Power Company, Baoding 071003, CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为提升大气污染物检测的灵敏度,提出一种基于石墨烯涂层高灵敏表面等离子体光子晶体光纤(SPR-PCF)传感器。该传感器采用不同直径空气孔六边形双排列结构,在纤芯外围镀上金膜,并在金膜与待测物之间涂敷一层石墨烯材料来提升灵敏度。利用有限元方法系统分析了金属层厚度、空气孔间距及直径和石墨烯厚度等因素对SPR-PCF传感器灵敏度的影响。结果表明,当折射率范围为1.398~1.402时,该传感器具有显著的表面等离子体共振效应。研究得到了最优结构参数,此时传感性能几乎不受环境温度影响,最大波长灵敏度达到55000nm/RIU,与之对应的折射率分辨率为1.82×10-6RIU。针对同一折射率测量范围、均为涂敷石墨烯的结构,所提出传感器的波长灵敏度是现有典型SPR-PCF传感器波长灵敏度的2.86~9.17倍,前者折射率分辨率是后者的0.109~0.349。因此,在大气污染物浓度和种类检测方面,该SPR-PCF传感器具有较好的应用前景。

    Abstract:

    To improve the sensitivity of air pollutants detection, a type of surface plasmon resonance-photonic crystal fiber (SPR-PCF) sensor based on graphene coating is proposed. The sensor adopts a hexagonal double arrangement structure with air holes of different diameters. The outer core of the sensor is coated with gold film, and a layer of graphene material is coated between the gold film and the object to be measured to improve sensitivity. The effects of metal layer thickness, spacing and diameter of air holes, and graphene thickness on the sensitivity of the SPR-PCF sensor were systematically investigated using the finite element method. For a refractive index range of 1.398~1.402, the results show that the sensor exhibits significant surface plasmon resonance effect. Applying the optimal structural parameters obtained by analysis, the sensing performance was almost unaffected by the ambient temperature. The maximum wavelength sensitivity reached 55,000nm/RIU, and the corresponding refractive index resolution was 1.82×10-6RIU. Compared with the structure coated with graphene in the same refractive index measurement range, the wavelength sensitivity of the proposed SPR-PCF sensor was 2.86~9.17 times that of the existing typical SPR-PCF sensor, and the refractive index resolution of the former was 0.109~0.349 that of the latter. Therefore, the proposed SPR-PCF sensor has good application prospects in the detection of atmospheric pollutant type and concentration.

    参考文献
    相似文献
    引证文献
引用本文

赵丽娟,黄梓朦,徐志钮,张硕,支九英.基于石墨烯涂层高灵敏SPR-PCF大气污染浓度检测传感器及特性研究[J].半导体光电,2024,45(6):870-878. ZHAO Lijuan, HUANG Zimeng, XU Zhiniu, ZHANG Shuo, ZHI Jiuying. Graphene Coated Highly Sensitive Surface Plasmon Resonance-Photonic Crystal Fiber Sensor for Detecting Air Pollutant Concentration[J].,2024,45(6):870-878.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2024-09-01
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-02-20
  • 出版日期:
文章二维码