Abstract:In this paper, a new technology for preparing sensors by polyether ether ketone (PEEK) tightly wraps fiber fusion stretch coating is proposed, which can improve the reliability and high temperature resistance of the sensor. The molding coating of this process is tight and can be controlled flexibly. The relationship between sensor preparation process and molding size was explored through numerical modeling. This method can prepare sensor samples with different diameters, which provides experimental support for this study. Characterize the structure of the sample and conduct high-temperature strain experiments. The results show that the concentricity and outer diameter of the sensor are affected by the tensile speed and heating temperature. The temperature sensitivity of PEEK sensors with diameter of approximately 0.7 mm, 0.59 mm and 0.51 mm are 50.65 pm/℃, 42.76 pm/℃ and 38.45 pm/℃, and the force sensitivity are 431.41 με/N, 532.90 με/N and 584.36 με/N, respectively. They have broad application prospects in the fields of monitoring and communication.