蓝宝石/TiN新型复合基板的设计及其上AlN薄膜制备研究
DOI:
CSTR:
作者:
作者单位:

1.五邑大学;2.广东省科学院半导体研究所

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2022YFB3605102);广东省科学院打造综合产业技术创新中心行动资金项目(2023GDASZH-2023030601-02);广东省自然科学基金-面上项目(2023A1515011175);广州市基础与应用基础研究专题(2024A04J3361).


Design and Fabrication of AlN Thin Films on Novel Sapphire/TiN Composite Template
Author:
Affiliation:

1.Institute of Semiconductors, Guangdong Academy of Sciences;2.Wuyi University

Fund Project:

National Key Research and Development Program of China(2022YFB3605102);Guangdong Provincial Academy of Sciences' Action Fund Project for Building a Comprehensive Industrial Technology Innovation Center(2023GDASZH-2023030601-02);Guangdong Natural Science Fund - General Program(2023A1515011175);Guangzhou Basic and Applied Basic Research Special Topic(2024A04J3361).

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    氮化铝(AlN)作为新一代超宽禁带半导体,因其在深紫外光电器件、电力电子器件等领域的广阔应用前景而备受关注。然而,高制备成本限制了其大规模应用。本研究设计了一种耐高温退火的蓝宝石/TiN新型复合基板结构,在其上低成本磁控溅射沉积AlN并结合高温热退火工艺,成功制备了c轴取向的AlN薄膜。研究分析了复合基板对AlN薄膜表面形貌和晶体质量的影响,并进一步探究了AlN薄膜的应力变化情况。结果表明,经1600℃高温退火30分钟后AlN薄膜仍保持完整连续,复合基板上制备的AlN薄膜表现为压应力,而纯蓝宝石上的AlN薄膜为张应力。本研究在低成本制备c轴取向AlN薄膜及对其应力调控方面提供了新的思路。

    Abstract:

    Aluminum nitride (AlN) is a new generation of ultra-wide bandgap semiconductors, which has attracted much attention due to its broad application prospects in deep ultraviolet optoelectronic devices, power electronic devices, etc. However, the high fabrication cost has limited its large-scale application. In this study, a novel composite template structure of sapphire/TiN that can withstand high-temperature annealing was designed. Low-cost magnetron sputtering was used to deposit AlN on it, combined with high-temperature annealing process, and c-axis oriented AlN thin films were successfully fabricated. The study analyzed the influence of the composite template on the surface morphology and crystal quality of AlN thin films, and further explored the stress changes of AlN thin films. The results showed that after 30 minutes of high-temperature annealing at 1600℃, the AlN thin films still remained [ ]intact and continuous. The AlN thin films prepared on the composite template showed compressive stress, while the AlN thin films on pure sapphire showed tensile stress. This study provides a new idea for the low-cost fabrication of c-axis oriented AlN thin films and the regulation of their stress.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-01-18
  • 最后修改日期:2025-02-23
  • 录用日期:2025-03-05
  • 在线发布日期:
  • 出版日期:
文章二维码