集成超表面的 MEMS热电堆红外探测器的设计及仿真
CSTR:
作者:
作者单位:

(1.中北大学省部共建动态测试技术国家重点实验室,太原 030051;2.天津伟加环境科技有限公司,天津 300450;3.中电科风华信息装备股份有限公司,太原 030062)

作者简介:

邵泊游(2000—),男,硕士研究生,主要研究方向为 MEMS热电堆红外传感器的设计及制备;雷程(1987—),男,博士,高级实验师,主要从事微纳红外传感、微纳压力传感及微纳器件制造与系统集成相关的工作。

通讯作者:

中图分类号:

TN216;TP212

基金项目:

国家重点研发计划项目(2023YFB3208500);山西省科技重大专项计划“揭榜挂帅”项目(202201030201010);山西省重点研发计划项目(2023020302010);中央引导地方科技发展项(YDZJSX20231B006).


Design and Simulation of MEMS Thermopile Infrared Detector with Integrated Metasurface
Author:
Affiliation:

(1. State Key Laboratory of Dynamic Measurement Technology,North University of China,Taiyuan 030051,CHN;2. Tianjin Weijia Environmental Technology Co.,Ltd.,Tianjin 300450,CHN;3. CETC Fenghua Information Equipment Co.,Ltd.,Taiyuan 030062,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    MEMS热电堆红外探测器作为一种重要的红外探测技术,已在众多领域得到了广泛应用。随着红外技术的不断发展和应用需求的不断增加,对热电堆红外探测器的性能指标也提出了更高的要求。文章设计了一种在吸收区集成超表面结构的热电堆探测器,该结构对 9~11 μm的红外光吸收率增大到 70%,同时,将热偶条形状设计为热端窄、冷端宽的四边形结构,可使热端向温度集中区进一步延伸,并有效降低了内阻。通过有限元仿真软件对结构进行仿真,结果显示,集成超表面后的探测器响应电压可达到 37. 876 mV,响应率和探测率经计算后分别为 41. 9 V/W和 1. 97×108 cm·Hz1/2·W?1,相较于未集成的探测器,其性能分别提升了 38. 9%,38. 7%和39. 7%。

    Abstract:

    Microelectromechanical system thermopile infrared detectors are an important infrared detection technology that is widely used in diverse fields. Owing to the continuous development of infrared technology and the increasing demand for its applications,the performance index for thermopile infrared detectors has increased. A thermopile structure with an integrated super-surface structure in the absorption region is designed to increase the absorption rate of infrared light from 9 to 11 μm to about 70%. Additionally,the thermocouple strip is designed as a quadrilateral structure with a narrow hot end and a wide cold end,which allows the hot end to extend to the temperature-concentration region,thus reducing the internal resistance. Finite-element simulation software is used to simulate the structure,and the results show that the response voltage of the detector after integrating the super-surface can reach 37. 876 mV. Meanwhile,the response and detection rates are calculated to be 41. 9 V/W and 1. 97×108 cm·Hz1/2·W?1,respectively,with performance enhancement by 38. 9%,38. 7%,and 39. 7% recorded.

    参考文献
    相似文献
    引证文献
引用本文

邵泊游,王凯,雷程,宫明峰,姬迪洋,张震宇,郭晋竹,梁庭.集成超表面的 MEMS热电堆红外探测器的设计及仿真[J].半导体光电,2025,46(2):284-292. SHAO Boyou, WANG Kai, LEI Cheng, GONG Mingfeng, JI Diyang, ZHANG Zhenyu, GUO Jinzhu, LIANG Ting. Design and Simulation of MEMS Thermopile Infrared Detector with Integrated Metasurface[J].,2025,46(2):284-292.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2024-06-01
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-06-26
  • 出版日期:
文章二维码