基于光纤光栅激光器传感螺栓应力测试方法研究
CSTR:
作者:
作者单位:

(北京信息科技大学 1.光电测试技术及仪器教育部重点实验室; 2.光纤传感与系统北京实验室,北京 100192)

作者简介:

黄俊伊(1998-),女,黑龙江省人,硕士研究生,主要研究方向为光纤传感;何巍(1986-),男,北京市人,博士,教授,主要研究方向为光纤传感系统。

通讯作者:

中图分类号:

TN253

基金项目:


Bolt Stress Testing Method Based on Fiber Bragg Grating Laser Sensing
Author:
Affiliation:

(1. Beijing Engineering Research Center of Optoelectronic Information and Instruments;2. Beijing Laboratory of Optical Fiber Sensing and System,Beijing Information Science & Technology University,Beijing 100192,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对螺栓在长期工作中出现松动、蠕变,提出一种基于光纤布拉格光栅(Fiber Bragg Grating,FBG)传感的螺栓应力测试方法。首先,利用飞秒激光加工技术透过光纤涂层制作 FBG,基于该光纤光栅设计线性腔结构的掺铒光纤激光器,实现具有高信噪比的激光输出;其次,分别设计并制备不同尺寸的不锈钢和铝材质的螺栓垫片,并对其受力特性进行仿真分析;然后,将 FBG分别嵌入不锈钢和铝材质垫片槽中并结合螺栓构建应力测试系统,通过对垫片表面施加应力,使得 FBG产生相应的形变,从而导致激光波长出现漂移。实验中,分别对槽深为 1,1.5 mm的不锈钢和铝材质垫片的螺栓应变测试系统施加 0~10 N·m应力,随着应力的增加,激光波长出现红移,1 mm槽深的不锈钢和铝垫圈传感器中心波长分别共移动了 41和 61.8 pm,灵敏度分别为

    Abstract:

    In this study,a bolt stress test method based on Fiber Bragg Grating(FBG)sensing is proposed to solve the problems of loosening and creep of bolts in long-term service. First,a femtosecond-laser processing technology was used to fabricate an FBG through fiber coating,and an erbium-doped fiber laser with a linear cavity structure was designed based on the fiber grating to achieve a laser output with a high signal-to-noise ratio. Second,bolt gaskets of different sizes made of stainless steel and aluminum were designed and fabricated,and their mechanical characteristics were simulated and analyzed. Next,the FBG was embedded in the stainless steel and aluminum gasket grooves and combined with the bolts to build a stress test system. Applying stress to the surface of the gasket deformed the FBG was accordingly,causing the laser wavelength to drift. In the experiment, stress of 0~10 N·m was applied to the bolt strain test system made of stainless steel and aluminum gasket with groove depths of 1 and 1. 5 mm. As the stress increased,the laser wavelength showed a red shift,and the center wavelength of the stainless steel and aluminum washer sensors with groove depths of 1 mm moved by 41 and 61. 8 pm,respectively;their sensitivities were 4. 05 and 6. 13 pm/(N·m), respectively. The 1. 5 mm groove-depth stainless steel and aluminum gasket sensors showed wavelength drifts of 141. 7 and 180. 5 pm,respectively,and sensitivities of 14. 12 and 18 pm/(N·m),respectively,along with a linearity of 0. 99.

    参考文献
    相似文献
    引证文献
引用本文

黄俊伊,何巍,李邵德.基于光纤光栅激光器传感螺栓应力测试方法研究[J].半导体光电,2025,46(2):350-359. HUANG Junyi, HE Wei, LI Shaode. Bolt Stress Testing Method Based on Fiber Bragg Grating Laser Sensing[J].,2025,46(2):350-359.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2024-11-29
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-06-26
  • 出版日期:
文章二维码