消色差超透镜设计及双光子聚合加工
CSTR:
作者:
作者单位:

(北京理工大学光电学院,北京 100081)

作者简介:

王洪波(2000-),男,硕士研究生,主要研究方向为超表面微纳加工方法;蒋强(1989-),男,副研究员,硕士生导师,主要研究方向为微纳光学、信息光学。

通讯作者:

中图分类号:

TN256;O436

基金项目:

国家自然科学基金项目(62005017);北京理工大学朗月计划(LY2024-10).


Achromatic Metalens Design and Two-photon Polymerization Processing
Author:
Affiliation:

(School of Optoelectronics,Beijing Institute of Technology,Beijing 100081,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为扩展超透镜的设计自由度,实现多功能的超透镜,并降低超表面器件的设计难度,提出一种基于梯度下降优化的超透镜逆向方法。结合反向传播算法求解梯度信息,实现了偏振不敏感的基于单层结构的消色差多阶超透镜设计。利用双光子聚合 3D打印技术,对加工工艺进行探索,实现了打印横向分辨率达到 200 nm的超透镜加工。实验测量到所加工的超透镜的焦距和设计值偏离小于 3%。对比其他报道,该研究结合了逆向设计方法的设计灵活性和双光子聚合 3D打印方法的三维加工优势,为超表面的高自由度设计和加工提供了新的思路,不仅充分发挥了超表面的光场调控优势,还推进了其工程应用。

    Abstract:

    To expand the design freedom of metalenses,realize multifunctional metalenses,and reduce the design difficulty of metasurface devices,an inverse method based on gradient-descent optimization is proposed. Combined with the backpropagation algorithm to solve the gradient information,the polarization-insensitive achromatic metalens design based on a single-layer structure is realized. Using two-photon polymerization three-dimensional(3D) printing technology, the processing technology was investigated,and a metalens with a lateral resolution of 200 nm was processed. Experimental results revealed that the focal length of the processed metalens deviated from the design value by less than 3%. Compared with other studies,this study combines the design flexibility of the inverse design method with the 3D processing advantages of the two-photon polymerization 3D printing method. As such,a new solution for designing and processing high-degree-of-freedom metasurfaces is provided by fully exploiting the advantages of light field control of metasurfaces,thereby promoting the engineering application of metasurfaces.

    参考文献
    相似文献
    引证文献
引用本文

王洪波,蒋强,黄玲玲.消色差超透镜设计及双光子聚合加工[J].半导体光电,2025,46(3):478-483. WANG Hongbo, JIANG Qiang, HUANG Lingling. Achromatic Metalens Design and Two-photon Polymerization Processing[J].,2025,46(3):478-483.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-03-26
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-07-28
  • 出版日期:
文章二维码