基于激光表面微结构的自动聚焦窗口研究
CSTR:
作者:
作者单位:

(长春理工大学 1.机电工程学院; 2.跨尺度微纳制造教育部重点实验室,长春 130022)

作者简介:

张佳俊(1999-),男,河北省秦皇岛市人,硕士研究生,主要研究方向微纳制造技术研究;李一全(1968-),男,吉林省长春市人,教授,主要研究方向微切削、界面力学。

通讯作者:

中图分类号:

TN249

基金项目:


Autofocus Window for Laser-Based Surface Microstructuring
Author:
Affiliation:

(1. School of Mechanical and Electrical Engineering;2. Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing,Changchun University of Science and Technology,Changchun 130022,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对在激光加工过程中传统自动对焦窗口构建技术在微纹理应用中实时性有限、易受背景噪声影响和计算量大的缺点,提出一种显著性窗口构建方法。该方法通过整合梯度和颜色线索,利用视觉显著性检测框架有效抑制无关背景信息,增强清晰度评估的特异性。通过引入一种结合 kirsch梯度分析、LAB颜色对比计算、局部归一化和纹理抑制的窗口提取算法,在亮度变化和复杂模式下可靠地描绘微纹理区域。在激光微加工装置上实验验证了该方法,其灵敏度相较于传统的中心窗口方法提高了约 83%,陡度提高了 75%,锐度比提高了 54%,从而产生单峰和快速响应的焦点曲线,支持稳定的微结构制造。这种显著性窗口为激光微加工平台提供了一个强大的解决方案,平衡了高精度和实时性。

    Abstract:

    To address the shortcomings of the autofocus?window construction technology used in conventional focusing methods for laser processing, such as limited real?time performance, vulnerability to background noise, and considerable computational complexity in microtexture applications, this study proposes a saliency?window construction method. This method utilizes image saliency to isolate the region of interest for focus evaluation by integrating gradients and color cues. The main idea is to apply a visual saliency?detection framework when generating an autofocus window to suppress irrelevant background information and enhance the specificity of sharpness evaluation. A window?extraction algorithm combining Kirsch gradient analysis, LAB color?contrast calculation, local normalization, and texture suppression is introduced, thus enabling microtexture regions to be reliably depicted under brightness variations and complex modes. The method was experimentally verified on a laser microprocessing device. Compared with the conventional central?window method, the proposed method exhibits higher levels of sensitivity, steepness, and sharpness ratio by approximately 83%, 75%, and 54%, respectively, thereby enabling the generation of single?peak and fast?response focus curves and supporting stable microstructure manufacturing. Owing to its ability to balance between high precision and real?time performance, this saliency window provides an effective solution for the laser microprocessing platform.

    参考文献
    相似文献
    引证文献
引用本文

张佳俊,李一全,于占江.基于激光表面微结构的自动聚焦窗口研究[J].半导体光电,2025,46(4):742-749. ZHANG Jiajun, YU Zhanjiang, LI Yiquan. Autofocus Window for Laser-Based Surface Microstructuring[J].,2025,46(4):742-749.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-07-02
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-08-25
  • 出版日期:
文章二维码