线结构光传感器误差对齿廓偏差测量的影响及误差补偿
CSTR:
作者:
作者单位:

(西安工业大学机电工程学院,西安 710021)

作者简介:

周禹成(2000-),男,硕士研究生,主要研究方向为齿轮光学精密测量;赫东锋(1975-),男,博士,副教授,主要研究方向为精密测量测试技术与智能机械。

通讯作者:

中图分类号:

TH741;TN249

基金项目:


Impact of Errors in Linear Structured-Light Sensors on Tooth Profile Deviation Measurement and Error Compensation
Author:
Affiliation:

(School of Mechatronic Engineering,Xi'an Technological University,Xi'an 710021,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为研究线结构光传感器在齿廓偏差测量中的精度问题,提出一种基于该传感器的齿廓偏差测量方法。通过建立测量渐开线圆柱齿轮齿廓的倾斜误差模型,并将其对直齿轮进行测量时的误差模型进行简化,系统分析了传感器空间姿态等因素对测量精度的影响。通过实验对标准渐开线样板进行测量并和 Klingelnberg P26齿轮测量中心结果进行对比,验证了所提方法的有效性。实验结果表明,在进行误差补偿后,所提出的基于线结构光传感器齿廓偏差测量方法能够达到 7级精度,满足渐开线直齿圆柱齿轮齿廓偏差的测量要求。

    Abstract:

    A measurement method for tooth profile deviation based on a line-structured light sensor is proposed to investigate its accuracy issues. An inclination error model for measuring the involute tooth profile of cylindrical gears was established and subsequently simplified for spur gears, through which the influence of factors such as sensor spatial posture on measurement accuracy was systematically analyzed. Experiments were conducted on a standard involute specimen,and the results were compared with those obtained from a Klingelnberg P26 gear measuring center. The experimental results show that after error compensation, the proposed method can meet the measurement requirements of Grade 7 accuracy for the profile deviation of involute spur cylindrical gears.

    参考文献
    相似文献
    引证文献
引用本文

周禹成,赫东锋.线结构光传感器误差对齿廓偏差测量的影响及误差补偿[J].半导体光电,2025,46(5):811-818. ZHOU Yucheng, HE Dongfeng. Impact of Errors in Linear Structured-Light Sensors on Tooth Profile Deviation Measurement and Error Compensation[J].,2025,46(5):811-818.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-09-21
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-10-31
  • 出版日期:
文章二维码