基于线光谱共焦的齿轮齿廓波纹度测量研究
CSTR:
作者:
作者单位:

(西安工业大学机电工程学院,西安 710021)

作者简介:

蔡昕宏(2001-),男,硕士研究生,主要研究方向为齿轮高精度光学测量;赫东锋(1975-),男,博士,副教授,主要研究方向为精密测量测试技术与智能机械。

通讯作者:

中图分类号:

TP391. 41;TH741

基金项目:


Gear Tooth Flank Waviness Measurement Based on Line Spectral Confocal Method
Author:
Affiliation:

(School of Mechatronic Engineering,Xi’an Technological University,Xi’an 710021)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对齿轮齿面波纹度这一导致传动振动噪声的关键因素,文章提出一种基于线光谱共焦技术的齿廓波纹度测量方法。首先,建立齿廓波纹度的测量模型,在此基础上完成齿廓波纹度的提取、全齿波纹度的拼接以及预处理,并完成对全齿波纹度曲线的傅里叶级数展开分析。接着,通过实验对上述方法进行实验验证。实验结果表明,所得波纹度曲线在各齿之间表现出良好的一致性,符合 3级精度齿轮的形貌特征,线光谱共焦传感器对齿轮的测量结果具有可靠性与稳定性。根据阶次图初步识别出 18. 8和 39的“鬼阶 ”频率,光谱共焦传感器可以完成对高精度齿轮表面的微观形貌的高速测量。

    Abstract:

    Gear tooth surface waviness is a key factor causing vibration and noise in gear transmission processes. To address the low efficiency of conventional contact measurement methods, this study proposes a tooth flank waviness measurement method based on line spectral confocal technology. A measurement model for tooth flank waviness was established,thus enabling waviness extraction, full-tooth waviness profile splicing, and preprocessing. Furthermore, Fourier-series expansion analysis was performed on the full-tooth waviness profile. Experiments involving measurements of all tooth flanks of a gear were conducted. The results indicate that the line spectral confocal sensor provides reliable and stable gear measurements. The Fourier-analysis results are consistent with periodic errors associated with waviness. The line spectral confocal sensor can achieve high-speed measurements of the micro-geometry of high-precision gear surfaces.

    参考文献
    相似文献
    引证文献
引用本文

蔡昕宏,赫东锋.基于线光谱共焦的齿轮齿廓波纹度测量研究[J].半导体光电,2025,46(6):1129-1136. CAI Xinhong, HE Dongfeng. Gear Tooth Flank Waviness Measurement Based on Line Spectral Confocal Method[J].,2025,46(6):1129-1136.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-10-10
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-12-26
  • 出版日期:
文章二维码