面向高速光电三维集成的硅通孔(TSV)仿真设计及特性验证
DOI:
CSTR:
作者:
作者单位:

联合微电子中心有限责任公司

作者简介:

通讯作者:

中图分类号:

基金项目:


Simulation Design and Characterization of TSV (Through-Silicon Via) for High-Speed Optoelectronic Three-dimensional Integration
Author:
Affiliation:

United Microelectronics Center

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    高速光电三维集成系统布线具有密度高、尺寸微小、结构复杂的特点。对高速光电三维集成中的纵向通路硅通孔(Through-Silicon Via, TSV)结构进行准确的传输特性表征,能够显著提高系统可靠性、缩短开发时间、降低流片成本。本文首先结合工艺参数对高速同轴硅通孔结构进行了仿真;然后设计并制备了基于L-2L去嵌方法的高速硅通孔测试结构;最后通过测试去嵌对高速硅通孔的传输特性进行了表征。将测试结果与仿真结果进行对比校核,结果表明:40GHz以内测试数据与模型仿真结果幅值百分比误差的平均值为0.938%,吻合度较高,验证了此仿真验证方法的准确度,可用于高速硅通孔的实际设计开发,对高速光电三维集成系统设计具有重要的指导意义。

    Abstract:

    Wiring of high-speed optoelectronic 3-D integrated systems is characterized by high density, small size and complex structure. Accurate characterization of vertical through-silicon via (TSV) structure in high-speed optoelectronic 3-D integration can significantly improve system reliability, shorten development time and reduce tape-out costs. This paper first simulates high-speed coaxial TSV structure with various parameters; based on the geometrical and process parameters determined from simulation, a proper high-speed coaxial TSV test structure based on L-2L de-embedding method is designed and prepared on 8-inch process platform; finally, the transmission characteristics of the high-speed TSV are obtained through de-embedding. The test results are compared with the simulation results, which shows that the average error between the test data and the simulation results within 40GHz is 0.938%. This verifies that the simulation method has high accuracy and can be applied for development of high-speed TSV and design of high-speed optoelectronic three-dimensional integrated systems.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-07-20
  • 最后修改日期:2025-08-06
  • 录用日期:2025-08-08
  • 在线发布日期:
  • 出版日期:
文章二维码