Abstract:To investigate the impact of attenuation caused by fiber bending on the measurement accuracy of Brillouin optical time domain reflectometry (BOTDR) systems, first, based on the Marcuse"s bending loss theory, the influence of bending radius and bending length on the attenuation level of Brillouin spectrum power is investigated in this work, and it is validated with experimental data. Subsequently, the relationship between Brillouin power attenuation and Brillouin spectrum signal-to-noise ratio is obtained from experimental data. Based on this, a method for studying the impact of fiber bending on the BOTDR measurement errors is established. The reliability of the proposed method was validated by the experiments with various bending radii and bending lengths. Using this method, the signal-to-noise ratio of the Brillouin spectrum was obtained for different bending radii and bending lengths. A large number of numerically generated noisy Brillouin spectra were used, and the corresponding Brillouin frequency shift error was calculated. Finally, the influence of fiber bending radius and bending length on Brillouin frequency shift errors was investigated. The results reveal that Brillouin frequency shift error nearly exponentially increases with increasing fiber bending length or decreasing fiber bending radius.