Abstract:To address the occlusion scenario of the line-of-sight (LOS) link in indoor visible light communication (VLC) systems, this paper proposes a system design scheme for VLC assisted by an intelligent reflecting surface (IRS). First, based on the indoor VLC system model, an IRS is introduced to improve the non-line-of-sight (NLOS) link, which effectively compensates for the channel attenuation of the occluded link. Then, the distributed deployment scenarios of single/multi-wall are designed. For the single-wall scenario, aiming at maximizing the channel gain, a joint optimization objective function of "reflective unit size + number of units" is constructed, and the sequential quadratic programming (SQP) algorithm is used to solve the key parameters of the IRS in the single-wall scenario. For the requirement of multi-wall distributed deployment, aiming at maximizing the achievable data rate, the hybrid particle swarm algorithm (HPSA) is adopted to optimize the parameter configuration such as the number of IRS arrays and the number of deployed walls. Simulation results show that for the single-wall scenario, under the condition of maintaining a symbol error rate (SER) of 10?3, the joint optimization scheme reduces the required signal-to-noise ratio (SNR) by 2.3 dB and 1.1 dB respectively compared with the unoptimized scheme and the separately optimized scheme. For the multi-wall scenario, under the same transmission power, the achievable rate of the joint optimization scheme is improved by 23% compared with the unoptimized scheme, and when the target rate is 1.5×10? bps, the joint optimization scheme can achieve an SNR gain of 8 dB. The proposed scheme significantly improves the communication performance of the VLC system in the occlusion scenario, and provides a theoretical basis for the engineering deployment of IRS-assisted VLC.