适用于MIPI D-PHY的快速自适应CTLE
DOI:
CSTR:
作者:
作者单位:

大连理工大学

作者简介:

通讯作者:

中图分类号:

基金项目:


Fast Adaptive Continuous-Time Linear Equalizer for MIPI D-PHY Specifications
Author:
Affiliation:

大连理工大学

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对MIPI D-PHY在高速模式下因信道损耗导致的码间干扰和眼图恶化等信号完整性问题,提出了一种快速自适应均衡架构。该架构基于幅值检测方法,通过实时比较均衡后信号与可调参考电压,不断调整参考电压以及均衡参数,快速搜索并锁定最佳均衡参数以使信号垂直眼高达到最大。本文基于65 nm CMOS工艺进行电路设计,电源电压1.2 V,数据速率6.5 Gbps。仿真结果表明,该架构能对0-13 dB@3.25 GHz的信道损耗进行有效补偿,自适应时间小于100 ns,功耗19.7 mW,均衡后信号眼图张开度显著改善。该电路具有结构简单,不依赖复杂数字算法,自适应速度较快等优点,适用于MIPI D-PHY高速接收端的信号完整性增强。

    Abstract:

    To address signal integrity issues such as inter-symbol interference and eye diagram degradation caused by channel loss in the high-speed mode of MIPI D-PHY, a fast adaptive equalization architecture is proposed. This architecture employs an amplitude detection method, dynamically adjusting the reference voltage and equalization parameters by comparing the equalized signal with a tunable reference voltage in real time. It rapidly searches and locks onto the optimal equalization parameters to maximize the vertical eye opening of the signal. This paper presents the circuit design based on a 65 nm CMOS process, with a supply voltage of 1.2 V and a data rate of 6.5 Gbps. Simulation results demonstrate that this architecture can effectively compensate for channel losses ranging from 0 to 13dB at 3.25 GHz, with an adaptation time of less than 100 ns and a power consumption of 19.7 mW. The equalized signal exhibits significantly improved eye diagram openness. The circuit features a simple structure, independence from complex digital algorithms, and relatively fast adaptation speed, making it suitable for signal integrity enhancement in high-speed MIPI D-PHY receivers.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-01-20
  • 最后修改日期:2026-03-03
  • 录用日期:2026-03-04
  • 在线发布日期:
  • 出版日期:
文章二维码