一种应用于光电探测器的宽带高增益跨阻放大器设计
DOI:
CSTR:
作者:
作者单位:

1.重庆邮电大学;2.电子科技大学;3.重庆光电技术研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


A Broadband High-Gain Transimpedance Amplifier for Optoelectronic Balanced Detectors
Author:
Affiliation:

1.Chongqing University of Posts and Telecommunications;2.Univ. of Electronic Science and Technology of China;3.Chongqing Institute of Photoelectric Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文提出一种面向光电平衡探测器的宽带高增益跨阻放大器,集成双向直流消除功能,消除输入电流的直流成分,跨阻放大器采用电压并联负反馈架构,通过三级"Cheery-Hooper"级联实现高带宽设计,结合自动增益控制电路动态调节增益以扩展输入动态范围,并利用直流失调消除环路抑制输出直流偏移。基于65 nm CMOS工艺设计,版图尺寸1.1mm×0.9 mm。后仿真结果表明:在1.6 V供电下,-3 dB带宽达1.6 GHz,差分跨阻增益78 dBΩ,输入参考噪声149 nA,功耗53 mW。该设计在带宽、增益与噪声间取得良好平衡,适用于对信号完整性要求较高的光电探测系统。

    Abstract:

    This paper proposes a wideband high-gain transimpedance amplifier (TIA) for balanced photodetectors, integrated with a bidirectional DC cancellation function to eliminate the DC component of the input current. The TIA adopts a voltage-shunt negative feedback architecture, achieving a high-bandwidth design through a three-stage "Cherry-Hooper" cascade. It incorporates an automatic gain control circuit to dynamically adjust the gain for extending the input dynamic range, and utilizes a DC offset cancellation loop to suppress output DC drift. Designed based on a 65 nm CMOS process, the layout size is 1.1 mm × 0.9 mm. Post-simulation results show that with a 1.6 V power supply, the -3 dB bandwidth reaches 1.6 GHz, the differential transimpedance gain is 78 dBΩ, the input-referred noise is 149 nA, and the power consumption is 53 mW. This design achieves a good balance among bandwidth, gain, and noise, making it suitable for photodetection systems requiring high signal integrity.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-01-24
  • 最后修改日期:2026-01-24
  • 录用日期:2026-01-26
  • 在线发布日期:
  • 出版日期:
文章二维码