熔融流动对多脉冲飞秒激光加工SiC烧蚀形貌的影响机理
DOI:
CSTR:
作者:
作者单位:

江南大学 机械工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Mechanism of Molten Flow on the Ablation Morphology of SiC Irradiated by Multi-Pulse Femtosecond Laser
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    飞秒激光因其优异的加工质量,在微纳加工领域受到广泛关注。尽管已有实验观察到飞秒激光烧蚀碳化硅(SiC)过程中因熔融飞溅导致重铸层的形成,但相关机理的理论建模仍较为匮乏。本文结合改进的多物理场耦合预测模型与实验表征,系统研究了多脉冲飞秒激光作用下熔体流动对SiC烧蚀形貌的演化机制。探究了SiC的烧蚀阈值及其累积效应。通过系统调控脉冲数和激光能量密度揭示了多脉冲诱导下熔融材料的去除与再沉积的动态循环过程,并依据近阈值能量密度成功制备高质量微孔。通过模拟与实验验证,优化了脉冲能量分配,显著提升了烧蚀效率。

    Abstract:

    Femtosecond laser has garnered extensive attention in the field of micro/nano fabrication owing to its superior processing quality. Although experimental observations have revealed the formation of recast layers caused by molten splashing during the femtosecond laser ablation of silicon carbide (SiC), theoretical modeling regarding the underlying mechanisms remains scarce. In this study, an improved multi-physics coupled predictive model combined with experimental characterization is employed to systematically investigate the evolution mechanism of molten flow on SiC ablation morphology under multi-pulse irradiation. The ablation threshold and its accumulation effect in SiC are examined. By systematically modulating the pulse number and laser fluence, the dynamic cycle of material removal and redeposition induced by multi-pulse irradiation is revealed, enabling the successful fabrication of high-quality micro-holes using near-threshold fluence. Furthermore, simulation and experimental validation facilitated the optimization of pulse energy distribution, resulting in a significant enhancement of ablation efficiency.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-02-02
  • 最后修改日期:2026-02-10
  • 录用日期:2026-02-10
  • 在线发布日期:
  • 出版日期:
文章二维码