连续光和脉冲光在近紫外激光直写光刻中曝光特性差异的研究
DOI:
CSTR:
作者:
作者单位:

中国科学院上海高等研究院

作者简介:

通讯作者:

中图分类号:

O439

基金项目:

(小五号黑体,顶格)xxxxxx项目(111222333).(项目名称及编号:小五号宋体)


Study of Differences in Exposure Characteristics between Continuous-Wave and Pulsed Lasers in Near-UV Laser Direct Writing Lithography
Author:
Affiliation:

Shanghai Advanced Research Institute,Chinese Academy of Sciences,Shanghai

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对近紫外激光直写光刻过程中正光刻胶在连续光与脉冲光下的曝光行为差异,本研究搭建了基于405 nm连续光与中心波长为400 nm飞秒脉冲光直写系统,通过对比实验分析了二者在刻写方面的不同表现。结果表明,在相同曝光剂量下,飞秒脉冲光由于功率密度较高,易出现互易性失效与吸收饱和现象,导致其刻写深度显著低于连续光,且刻写点直径增大、侧壁角减小,形貌更为平缓。相比之下,连续光在较低功率密度下遵循剂量互易原则,刻写点具有更小的直径和更陡峭的侧壁结构。研究揭示了近紫外波段下脉冲光与连续光在正性光刻胶响应机制上的区别,也为高精度激光直写工艺中的光源选型以及工艺参数的优化提供了部分的理论指导与应用参考。

    Abstract:

    To investigate the differences in the exposure behavior of positive photoresists under continuous-wave (CW) and pulsed lasers(PL) in near-ultraviolet (near-UV) laser direct writing lithography, this study constructed direct writing systems utilizing a 405 nm CW laser and a femtosecond pulsed laser with a central wavelength of 400 nm, analyzing their distinct patterning performances through comparative experiments. The results demonstrate that under identical exposure doses, the femtosecond pulsed laser, owing to its extraordinarily high power density, is highly susceptible to reciprocity failure and absorption saturation. Consequently, this leads to a significantly shallower patterning depth compared to the CW laser, accompanied by an increased feature diameter, a reduced sidewall angle, and a flatter overall morphology. In contrast, the CW laser, operating at lower power densities, adheres to the principle of dose reciprocity, resulting in patterned features with smaller diameters and steeper sidewall structures. This research elucidates the distinct response mechanisms of positive photoresists to pulsed versus CW light in the near-UV regime, providing theoretical guidance and practical reference for light source selection and process parameter optimization in high-precision laser direct writing processes.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-02-11
  • 最后修改日期:2026-03-23
  • 录用日期:2026-03-23
  • 在线发布日期:
  • 出版日期:
文章二维码