基于场路协同的 PIN光电探测器仿真设计
CSTR:
作者:
作者单位:

(1.西南电子设备研究所微波光子技术四川省重点实验室,成都 610036;2.重庆光电技术研究所,重庆 400060)

作者简介:

莫元荣(2001-),男,重庆市人,硕士研究生,主要从事微波光子学的研究;陈智宇(1986-),男,四川省人,博士,正高级工程师,主要从事微波光子系统仿真研究。

通讯作者:

中图分类号:

TN364

基金项目:


PIN Photodetector Simulation and Design via Coupled Field-Link Simulation
Author:
Affiliation:

(1. Sichuan Provincial Key Laboratory of Microwave Photonics Technology,Southwest China Research Institute of Electronic Equipment,Chengdu 610036,CHN;2. Chongqing Optoelectronic Technology Institute,Chongqing 400060,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对传统光电探测器行为级模型仿真精度不足、物理场模型计算代价高的问题,提出一种基于场路协同的 PIN光电探测器仿真方法。该方法以三层 InP/InGaAs光电探测器为对象,在物理场层面上引入载流子连续性方程与速率方程,计算光电探测器的物理特性,如材料特性、结构特性以及光电流特性;在链路层面,可将由物理场模型获得的物理特性引入链路模型,建立包含器件物理参数耦合的光电探测器模型。仿真结果表明,I区宽度、外加偏压和光敏面面积等参数会显著影响光电探测器的脉冲响应、频率响应和响应度,所建模型能较准确地反映器件动态特性,可为微波光子链路中的噪声评估和系统优化提供支撑。与商业软件相比,所提方法计算效率更高,且仿真准确度能达到 90%。

    Abstract:

    To address insufficient simulation accuracy in traditional behavioral-level models of photodetectors and the high computational cost of physical-field models,a simulation method for PIN photodetectors based on field-link co-simulation is proposed. A three-layer InP/InGaAs photodetector was used as the research object. The method introduces the carrier continuity equation and rate equations at the physical-field level to calculate the physical characteristics of the photodetector, including material properties, structural characteristics, and photocurrent characteristics. At the link level,the physical characteristics obtained from the physical-field model are incorporated into the link model,thereby establishing a photodetector model that includes the coupling of device physical parameters. Simulation results show that such parameters as the width of the intrinsic region,the applied bias voltage,and the photosensitive area significantly affect the pulse response, frequency response, and responsivity of the photodetector. The proposed model can accurately reflect the dynamic characteristics of the device and provide support for noise evaluation and system optimization in microwave photonic links. Compared with commercial software,the proposed method achieves higher computational efficiency while maintaining a simulation accuracy of 90%.

    参考文献
    相似文献
    引证文献
引用本文

莫元荣,周涛,孙岩,徐嘉鑫,熊建伟,葛菊祥,黄峻杰,肖永川,陈智宇.基于场路协同的 PIN光电探测器仿真设计[J].半导体光电,2026,47(2):320-325. MO Yuanrong, ZHOU Tao, SUN Yan, XU Jiaxin, XIONG Jianwei, GE Juxiang, HUANG Junjie, XIAO Yongchuan, CHEN Zhiyu. PIN Photodetector Simulation and Design via Coupled Field-Link Simulation[J].,2026,47(2):320-325.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-03-17
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-05-25
  • 出版日期:
文章二维码