陶封光电耦合器灌胶技术研究
CSTR:
作者:
作者单位:

(1.重庆光电技术研究所,重庆 400060;2.广电计量检测集团股份有限公司,广州 511450)

作者简介:

李洪玉(1981-),女,高级工程师,主要从事微组装工艺方面的研究。

通讯作者:

中图分类号:

TN36

基金项目:


Research on the Glue Filling Technology of Ceramic Sealed Photocouplers
Author:
Affiliation:

(1. Chongqing Optoelectronics Research Institute,Chongqing 400060,CHN; 2. GRG Metrology & Test Group Co.,Ltd.,Guangzhou 511450,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    陶封光电耦合器因尺寸小、密封腔体结构特殊,需通过灌胶工艺提升其绝缘性能以满足隔离电压要求。胶量过少难以有效提升绝缘强度,胶量过多则会影响密封封装可靠性,精确控制胶量是保证器件性能的关键。文章系统研究了灌胶材料选型、工艺流程及参数优化,提出一种采用 45°斜针头从内瓷片中间倒角处灌胶的工艺方法,结合分层灌胶、真空除泡及精确气压控制,实现了胶量的精准调控与气泡的有效消除。结果表明,优化后器件的隔离电压从灌胶前的 800 V提升至 1 500 V以上,增幅超过 87. 5%,且通过热应力实验及批量产品筛选鉴定检验,验证了该工艺的可靠性与一致性。该研究为陶瓷器件密封腔体的灌胶工艺提供了可行方案与技术参考。

    Abstract:

    A ceramic-sealed photocoupler, which is the core component for photoelectric conversion,must be filled with glue to increase its insulation performance and ensure that the isolation voltage meets the requirements. A low glue content limits the insulation performance,whereas a high glue content affects the device-sealing package. Therefore,accurately controlling the glue content significantly influences the performance of products. In this study,a gluing technology that can effectively control the amount of glue and eliminate bubbles is investigated. A 45°inclined needle is used for gluing from the chamfer in the middle of the inner porcelain plate to increase the isolation voltage by more than 87. 5%(from 800Vtoover1500V)—this process ensures that the isolation voltage of the ceramic photocoupler meets the requirements. A reliability evaluation of the gluing effect is conducted through a thermal stress test,with the results demonstrating the ability of this gluing technology to meet the design requirements. This study provides a new concept for the cementing process of ceramic device-sealing cavities.

    参考文献
    相似文献
    引证文献
引用本文

李洪玉,金晖,黎元凯,肖清惠.陶封光电耦合器灌胶技术研究[J].半导体光电,2026,47(2):340-344. LI Hongyu, JIN Hui, LI Yuankai, XIAO Qinghui. Research on the Glue Filling Technology of Ceramic Sealed Photocouplers[J].,2026,47(2):340-344.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-11-12
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-05-25
  • 出版日期:
文章二维码