缓冲层厚度与层数对 InP衬底上 InGaAs材料性能的影响
CSTR:
作者:
作者单位:

(重庆光电技术研究所,重庆 400060)

作者简介:

吴唯(1990—),男,工程师,主要研究方向为 MOCVD Ⅲ.Ⅴ外延材料生长。

通讯作者:

中图分类号:

TN304. 2

基金项目:


Effects of Buffer Layer Thickness and Number on Structural and Optical Properties of InGaAs on InP
Author:
Affiliation:

(Chongqing Optoelectronics Research Institute,Chongqing 400060,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文章系统研究了 InP衬底上 InGaAs缓冲层的厚度与层数对 2 000 ppm晶格失配的 In0. 44Ga0. 56As外延材料性能的调控规律。经研究发现,在固定晶格失配度下,存在缓冲层厚度与层数的最优匹配关系,可实现高质量失配 InGaAs材料的可控制备。实验结果表明,当缓冲层层数为 6、单层层厚为 200 nm时,外延材料的综合性能最优,其 XRD半峰宽低至 31. 3 arcsec,本征载流子浓度低至 5. 5×1014 cm.3,核心指标与晶格匹配的 In0. 47Ga0. 53As材料相当。研究进一步发现,缓冲层总厚度过厚或层数过多会引发晶格弛豫,造成晶体质量急剧退化,维持外延层应变状态是实现该类失配材料高质量生长的关键。该研究为高失配度 Ⅲ-Ⅴ族半导体外延材料的结构设计与工艺优化提供了重要的实验依据。

    Abstract:

    This study investigates the influence of the thickness and number of InGaAs buffer layers on the performance of In0. 44Ga0. 56As epitaxial materials with a lattice mismatch of 2 000 ppm on InP substrates. We demonstrate that,for a fixed lattice mismatch,an optimal buffer layer thickness– layer number relationship enables controlled growth of high-quality lattice-mismatched InGaAs materials. Experimental results demonstrate that a buffer structure consisting of 6 layers, each 200 nm thick,provides optimal material performance,achieving a full width at half maximum of the X-ray diffraction rocking curve as low as 31. 3 arcsec and an intrinsic carrier concentration of 5. 5× 1014 cm.3 . These results are comparable to those of lattice-matched In0. 47Ga0. 53As materials. Our findings confirm that excessive total thickness or an overly large number of buffer layers can induce lattice relaxation,which significantly degrades crystal quality. Maintaining the strain state of the epitaxial layer is critical for achieving high-quality growth of these lattice-mismatched materials. This study provides essential experimental evidence for the structural design and process optimization of group Ⅲ -Ⅴ semiconductor epitaxial materials with large lattice mismatch.

    参考文献
    相似文献
    引证文献
引用本文

吴唯,孟钰淋,赵红,杨晓波,刘尚军,骆小顺,李志伟,漆雪松,舒治豪.缓冲层厚度与层数对 InP衬底上 InGaAs材料性能的影响[J].半导体光电,2026,47(2):345-349. WU Wei, MENG Yulin, ZHAO Hong, YANG Xiaobo, LIU Shangjun, LUO Xiaoshun, LI Zhiwei, QI Xuesong, SHU Zhihao. Effects of Buffer Layer Thickness and Number on Structural and Optical Properties of InGaAs on InP[J].,2026,47(2):345-349.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-03-23
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-05-25
  • 出版日期:
文章二维码