Abstract:To address the application demands for wide dynamic range imaging in fields such as industrial inspection, scientific imaging, and security surveillance, a wide dynamic range CMOS image sensor has been designed. The device is based on a 4T pixel structure, with optimized doping of the internal photodiode to enhance the pixel full-well capacity. In terms of the readout method for the photosensitive pixel array, column-parallel readout circuits with different gain factors are designed to simultaneously sample, amplify, analog-to-digital convert, and read out the photosensitive signal voltage output from the same pixel. The two signals with different gains are then fused off-chip into an HDR image. This design is implemented and fabricated using a 180nm CMOS image sensor process. The effective pixel array scale is 1024×1024, with a pixel size of 15μm×15μm. The gains of the two column-parallel readout circuits are 1 and 8, respectively. Test results show that the dynamic range can reach 82.7dB.