Abstract:Periodic connection/disconnection of large capacitive loads in the global-shutter mode of CMOS image sensors can induce output-voltage undershoot, long settling time, and excessive ripple in the driver supply. This paper presents a capacitorless regulated charge-pump driver that achieves fast transient response with low ripple. The proposed three-stage power-delivery network sequentially employs main-supply precharge, charge-pump fast compensation, and linear-regulator precise correction, thereby enabling rapid voltage ramp-up for large capacitive loads and a stable, low-ripple output. Implemented in a 180-nm CMOS process and validated by process-corner simulations, the driver achieves <265 mV undershoot and <48.9 ns 99% settling time under periodic switching of a 3.5-nF load capacitor, while maintaining <0.837 mVpp steady-state ripple. The 99% settling time for a 0V to 3.8V transition at the load node is <77.04 ns. Driving capability is defined as the ratio of the driver’s output capacitance to the load capacitance; under this definition, the proposed design improves driving capability by ~29× over prior capacitorless designs while preserving low-ripple regulation.