400℃热解PDMS薄膜的Si-C微观结构特征研究
DOI:
CSTR:
作者:
作者单位:

1.中国科学院半导体研究所 半导体芯片物理与技术全国重点实验室;2.中国科学院大学 材料科学与光电技术学院;3.低维半导体材料与器件北京市重点实验室

作者简介:

通讯作者:

中图分类号:

TN304

基金项目:

北京市自然科学基金(L258007)


Study on the Si-C Microstructural Characteristics of PDMS Films Pyrolyzed at 400 ℃
Author:
Affiliation:

1.State Key Laboratory of Semiconductor Chip Physics and Technology, Institute of Semiconductors, Chinese Academy of Sciences;2.College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences;3.Beijing Key Laboratory of Low-Dimensional Semiconductor Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本研究在400℃低温下,采用固态聚二甲基硅氧烷(PDMS)薄膜作为前驱体,通过热解技术成功制备了富含Si-O-C网络的陶瓷薄膜。系统探究了PDMS薄膜初始厚度(200 μm、300 μm以及400 μm)与衬底类型(n型SiC、半绝缘SiC及SiO?/Si)对陶瓷薄膜微观结构、化学组成及表面形貌的影响。研究进一步探讨了低温固态源热解过程中薄膜结构的演变规律,证实了在n型SiC衬底上采用200 μm前驱体是制备结构更致密陶瓷薄膜的最优工艺。

    Abstract:

    This study successfully fabricated ceramic films rich in Si-O-C networks via pyrolysis at a low temperature of 400 °C, utilizing solid-state polydimethylsiloxane (PDMS) films as precursors. The effects of the initial PDMS film thickness (200 μm, 300 μm, and 400 μm) and substrate type (n-type SiC, semi-insulating SiC, and SiO?/Si) on the microstructure, chemical composition, and surface morphology of the ceramic films were systematically investigated. The research further investigates the structural evolution of the low-temperature solid-source pyrolysis process, confirming that utilizing a 200 μm precursor on an n-type SiC substrate is the optimal condition for fabricating denser ceramic films.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-03-07
  • 最后修改日期:2026-04-10
  • 录用日期:2026-04-27
  • 在线发布日期:
  • 出版日期:
文章二维码