具有 P.top层与缓冲层结构 LDMOS击穿特性研究
CSTR:
作者:
作者单位:

(兰州交通大学电子与信息工程学院,兰州 730070)

作者简介:

李尧(1987-),男,甘肃省武威市人,博士,副教授,硕士生导师,主要研究方向为功率半导体器件、有机半导体器件、光电子器件。

通讯作者:

中图分类号:

TN386. 1

基金项目:

国家自然科学基金项目(61905102,62264008);兰州市青年科技人才创新项目(2023.QNQ.119);甘肃省高校青年博士支持项目(2024QB-050);开放课题(甘财教[ 2023]36号-集成电路产业研究院).


LDMOS Breakdown with P-Type Top Layer and Buffer Layer Structure
Author:
Affiliation:

(School of Electronic and Information Engineering,Lanzhou Jiaotong University,Lanzhou 730070,CHN)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在传统平面栅横向双扩散金属氧化物半导体(CON-LDMOS)结构的基础上,设计了一种具有 P-top层与 N型缓冲层结构的 LDMOS(BP-LDMOS)。 P-top层辅助耗尽漂移区,拓宽了耗尽层宽度,并缓解了栅极右侧拐角处的电场集中效应,使横向电场分布更加均匀,进而提升器件耐压特性;N型缓冲层的设计,增大了漂移区内载流子密度,使器件导通特性得到改善。文章深入探究了 P-top层掺杂浓度、长度、厚度以及漂移区掺杂浓度对 BP-LDMOS击穿特性的影响。仿真结果表明,相较于 CON-LDMOS,BP-LDMOS的击穿电压为 329.4 V,提升了 3%;比导通电阻为 23.1 mΩ·cm2,降低了 40. 1%;品质因数为 4. 70 MW/cm2,提升了 77. 4%。

    Abstract:

    A laterally diffused metal – oxide – semiconductor(LDMOS)structure named BP-LDMOS with a P-type top layer and an N-type buffer layer was designed based on a traditional planar-gate LDMOS structure(CON-LDMOS). The P-type top layer assists in the depletion drift zone,broadens the depletion layer width,alleviates the electric field concentration effect at the right corner of the grid,and makes the transverse electric field distribution more uniform. This results in better voltage resistance of the device. The design of the N-type buffer layer increases the carrier density in the drift zone and improves the conduction characteristics of the device. In this study,the influences of the doping concentration,length,and thickness of the P-type top layer,and the doping concentration in the drift zone on the breakdown characteristics of BP-LDMOS were studied. The simulation results showed that, compared with CON-LDMOS,the breakdown voltage of BP-LDMOS was 329. 4 V,which is 3% higher;the specific on-resistance was 23. 1 mΩ·cm2, which is 40. 1% lower;and the quality factor FOM was 4. 70 MW/cm2,which is 77. 4% higher.

    参考文献
    相似文献
    引证文献
引用本文

李尧,张鹏杰,牛瑞霞,张栩莹.具有 P. top层与缓冲层结构 LDMOS击穿特性研究[J].半导体光电,2026,47(3):469-474. LI Yao, ZHANG Pengjie, NIU Ruixia, ZHANG Xuying. LDMOS Breakdown with P-Type Top Layer and Buffer Layer Structure[J].,2026,47(3):469-474.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-11-13
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-06-25
  • 出版日期:
文章二维码