柔性硅光电晶体管性能的多物理场研究
DOI:
CSTR:
作者:
作者单位:

电子科技大学物理学院

作者简介:

通讯作者:

中图分类号:

TP212

基金项目:

四川省海聚计划(2024JDHJ0007);湖州市公益性应用研究项目(2024GZ52).


Multiphysics Study on the Performance of Flexible Silicon Phototransistors
Author:
Affiliation:

School of Physics,University of Electronic Science and Technology of China

Fund Project:

Sichuan Provincial Haiju Program (2024JDHJ0007); Huzhou Municipal Public Welfare Applied Research Project (2024GZ52)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    柔性硅光电探测器依托硅材料的天然优势,已成为智能穿戴、电子皮肤、折叠显示等柔性电子领域的核心元器件,然而针对纯硅柔性光电子元器件在机械形变下的性能演变机制研究尚不足。本工作构建了“光-电-力”的多物理场耦合模型,系统研究不同有源层厚度(4.0~6.0μm)的硅双极型光电晶体管(BJPT)在单轴拉伸弯曲条件下(曲率半径由平展至10mm)的光谱特性与光电瞬态响应。研究结果表明器件的光电性能与抗机械疲劳能力之间存在显著的“厚度-应变”权衡规律。较厚器件(6.0μm)由于表面距离力学中性层更远,承受了更剧烈的非均匀应变梯度,在10mm极值弯曲下光电流下降16.5%,受缺陷诱导的暗电流增加55.1%的影响,开关比大幅降低46.0%。相比之下,4.0μm超薄器件因其几何结构更贴近力学中性面,有效释放了宏观晶格应力,其光电流衰减被限制在6.0%以内,比探测率维持在1.7×10的12次方Jones。本研究揭示了柔性纯硅器件不同厚度几何设计在抑制非对称能带畸变与缺陷累积中的本征物理规律,为高可靠性、抗应力漂移的纯硅柔性光电传感系统提供了具有普适性的理论支撑。

    Abstract:

    Leveraging the inherent advantages of silicon, flexible silicon photodetectors have become core components in flexible electronics fields such as smart wearables, electronic skins, and foldable displays. However, research on the performance evolution mechanisms of pure silicon flexible optoelectronic devices under mechanical deformation remains insufficient. In this work, a multiphysics coupling model encompassing "optical-electrical-mechanical" fields is established to systematically investigate the spectral characteristics and photoelectric transient responses of silicon bipolar junction phototransistors (BJPTs) with varying active layer thicknesses (4.0–6.0μm) under uniaxial tensile bending conditions (curvature radii ranging from flat to 10 mm). The results reveal a significant "thickness-strain" trade-off between the photoelectric performance and the mechanical fatigue resistance of the devices. Thicker devices (6.0μm), whose surfaces are located farther from the neutral mechanical plane, endure more severe non-uniform strain gradients. Under extreme bending at a 10 mm radius, the photocurrent decreases by 16.5%, and the on/off ratio drops significantly by 46.0% due to a 55.1% increase in defect-induced dark current. In contrast, ultra-thin devices (4.0μm) feature geometries closer to the neutral mechanical plane, effectively releasing macroscopic lattice stress. Consequently, their photocurrent attenuation is limited to within 6.0%, and the specific detectivity is robustly maintained at Jones. This study elucidates the intrinsic physical mechanisms by which varying thickness designs suppress asymmetric band distortion and defect accumulation, providing universally applicable theoretical support for the development of highly reliable, stress-drift-resistant pure silicon flexible optoelectronic sensing systems.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-03-16
  • 最后修改日期:2026-04-09
  • 录用日期:2026-04-20
  • 在线发布日期:
  • 出版日期:
文章二维码