双光谱扫描成像系统设计
DOI:
CSTR:
作者:
作者单位:

重庆邮电大学

作者简介:

通讯作者:

中图分类号:

基金项目:


Design of a Dual-Spectral Scanning Imaging System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对传统双光谱成像系统存在图像配准困难、视场角度小、成本高等问题,提出一种基于单元扫描的双光谱成像系统。该系统通过分光镜实现红外线和可见光分离,而红外线由红外聚焦镜头汇聚到红外单元传感器,可见光由普通光学镜头汇聚到可见光传感器,通过等时间扫描采样方法实现双光谱成像。为了提高测温精度,系统针对成像距离和角度进行补偿,并选择双线性插值的图像映射方法使采集红外图像和可见光图像分辨率一致。实验结果表明:基于单元扫描的双光谱成像系统具有视场宽,无需配准便可将红外图像映射到可见光图像,且成本低廉。

    Abstract:

    In response to the problems of image registration difficulty, small field of view angle and high cost in traditional dual-spectrum imaging systems, a dual-spectrum imaging system based on unit scanning is proposed. This system realizes the separation of infrared and visible light through a beam splitter, with the infrared light being converged by an infrared focusing lens to an infrared unit sensor, and the visible light being converged by an ordinary optical lens to a visible light sensor. Dual-spectrum imaging is achieved through the equal-time scanning sampling method. To improve the temperature measurement accuracy, the system compensates for the imaging distance and angle, and selects the bilinear interpolation image mapping method to make the resolutions of the collected infrared image and visible light image consistent. Experimental results show that the dual-spectrum imaging system based on unit scanning has a wide field of view, can map the infrared image to the visible light image without image registration, and has low cost.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-04-08
  • 最后修改日期:2026-04-08
  • 录用日期:2026-04-28
  • 在线发布日期:
  • 出版日期:
文章二维码