不同像素结构CMOS图像传感器仿真对比与特性分析
DOI:
CSTR:
作者:
作者单位:

1.兰州大学;2.强脉冲辐射环境模拟与效应全国重点实验室;3.湘潭大学 材料科学与工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Simulation Comparison and Characteristic Analysis of CMOS Image Sensors with Different Pixel Structures
Author:
Affiliation:

1.Lanzhou University,School of Materials and Energy,Lanzhou of Gansu Prov;2.National Key Laboratory of Intense Pulsed Radiation Simulation and Effect Northwest Institute of Nuclear Technology,Xian of Shaanxi Prov;3.Xiangtan University,School of Materials Science and Engineering,Xiangtan of Hunan Prov

Fund Project:

Supported by the Basic Research Program of Shaanxi Provincial Natural Science Foundation (No. 2024JC-JCQN-10); Supported by the National Natural Science Foundation of China (No. U2167208); Supported by the National Key Laboratory Foundation (No. NKLIPR2320)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    互补金属-氧化物半导体(Complementary Metal-Oxide Semiconductor, CMOS)图像传感器以其高集成度、低功耗、低成本等优点,已广泛应用在数码摄影、医疗及工业领域。本工作以CMOS图像传感器(CIS)像素结构为对象,采用TCAD仿真工具,通过建立3T、4T、6T CMOS图像传感器像素单元的物理模型,设定统一的仿真条件,对像素单元的电子密度、电势分布、暗信号、满阱容量进行系统性仿真分析。仿真结果表明:3T像素结构最简单、面积最小,但存在暗信号较大、复位噪声较大的缺陷;4T像素通过增加转移管实现了复位与信号读取的分离,有效抑制了复位噪声,暗电流显著降低;6T像素引入增益选择晶体管和高动态范围晶体管,进一步优化了信号读取稳定性,暗信号与噪声水平较低、响应速度较快,满阱容量更大。

    Abstract:

    Complementary Metal-Oxide Semiconductor (CMOS) image sensors have been widely used in digital photography, medical treatment and industrial fields due to their advantages of high integration, low power consumption and low cost. In this work, the pixel structure of CMOS image sensors (CIS) is taken as the research object. Using TCAD simulation tools, physical models of 3T, 4T and 6T CIS pixels are established, and unified simulation conditions are set to systematically simulate and analyze the electron density, potential distribution, dark signal and full-well capacity of the pixel units. The simulation results show that the 3T pixel has the simplest structure and the smallest area, but suffers from large dark signal and high reset noise. The 4T pixel realizes the separation between reset and signal readout by adding a transfer transistor, which effectively suppresses reset noise and significantly reduces dark current. The 6T pixel introduces gain-select and high-dynamic-range transistors, which further improves the stability of signal readout, with lower dark signal and noise, faster response speed and larger full-well capacity.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-04-28
  • 最后修改日期:2026-05-14
  • 录用日期:2026-05-26
  • 在线发布日期:
  • 出版日期:
文章二维码