基于光纤光栅的指套触觉传感器设计???
DOI:
CSTR:
作者:
作者单位:

1.南通大学 机械工程学院;2.南通大学 电气工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金面上项目(52377117,62473216);江苏省研究生科研与实践创新计划项目(KYCX24_3558)


Design of a Finger-Cuff Tactile Sensor Based on a Fiber Bragg Grating*
Author:
Affiliation:

School of Electrical Engineering, Nantong University,

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对机器人灵巧操作中对柔性、抗干扰以及类皮肤触觉感知的迫切需求,提出了一种基于光纤布拉格光栅的柔性指套触觉传感器。采用有限元分析软件ANSYS对传感器的结构进行设计分析并通过光固化3D打印技术与柔性树脂材料,完成了柔性FBG指套的研制与静态性能标定实验。基于标定数据对指套的触觉感知功能进行了全面检验,验证了所研制指套在空间分辨与力感知方面的综合性能。结果表明,四根FBG的灵敏度分别为43.64pm/N、21pm/N、42.74pm/N、19.96pm/N,线性度范围在0.98左右,相对标准偏差在2.2%以内。该传感器与机器人手指的贴合度较高,对机器人柔性化、智能化的触觉感知具有一定的应用价值。

    Abstract:

    In response to the urgent demands for flexibility, interference immunity, and skin-like tactile perception in dexterous robotic manipulation, a flexible fingertip tactile sensor based on fiber Bragg gratings (FBGs) is proposed. The sensor structure was designed and analyzed using the finite element analysis software ANSYS. A flexible FBG fingertip sleeve was fabricated via stereolithography 3D printing with flexible resin materials, followed by static calibration experiments. Based on the calibration data, the tactile sensing functionality of the fingertip sleeve was comprehensively evaluated, verifying its integrated performance in spatial resolution and force perception. Results indicate that the sensitivities of the four FBGs are 43.64 pm/N, 21 pm/N, 42.74 pm/N, and 19.96 pm/N, respectively, with linearity around 0.98 and relative standard deviation within 2.2%. The sensor exhibits good conformity with robotic fingers and demonstrates considerable application value for flexible and intelligent tactile perception in robotics.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-05-22
  • 最后修改日期:2026-07-06
  • 录用日期:2026-07-07
  • 在线发布日期:
  • 出版日期:
文章二维码