基于DSRC-YOLOv11n的轴承表面缺陷检测方法
DOI:
CSTR:
作者:
作者单位:

1.华北理工大学电气工程学院;2.河北省风光氢储安全监测与智能运行技术创新中心

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省自然科学基金(F2018209201)


Bearing Surface Defect Detection Method Based on DSRC-YOLOv11n
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对轴承表面缺陷检测中存在检测精度不足与漏检率较高的问题,提出一种改进YOLOv11n的缺陷检测模型DSRC-YOLOv11n。首先,设计轻量化骨干网络DS-Backbone:嵌入分裂式空间压缩卷积(SPConv)降低骨干网络计算成本,同时在核心C3k2模块中引入动态卷积(DynamicConv)增强对复杂缺陷的适应性。其次,在颈部网络中引入扩张残差(DWR)模块构建C3k2-DWR,扩大感受野以强化多尺度特征融合。最后,引入通道先验卷积注意力机制(CPCA),引导网络聚焦关键缺陷区域。在自建轴承表面缺陷数据集上的实验表明,相比原始YOLOv11n模型,DSRC-YOLOv11n的召回率、mAP50和mAP@0.5:0.95分别提升了4.2%、3.0%和2.1%,其中召回率的显著提升有效降低了漏检率。该模型在提升检测精度的同时有效控制了漏检,为工业场景下的自动化质检提供了可靠技术支撑。

    Abstract:

    In view of the problems of insufficient detection accuracy and high missed detection rate in bearing surface defect detection, a defect detection model DSRC-YOLOv11n based on improved YOLOv11n is proposed. Firstly, a lightweight backbone network DS-Backbone is designed: Split Spatial Compression Convolution (SPConv) is embedded to reduce the computational cost of the backbone network, and Dynamic Convolution (DynamicConv) is introduced into the core C3k2 module to enhance the adaptability to complex defects. Secondly, the Dilation-wise Residual (DWR) module is introduced into the neck network to construct C3k2-DWR, expanding the receptive field to strengthen multi-scale feature fusion. Finally, the Channel Prior Convolutional Attention mechanism (CPCA) is introduced to guide the network to focus on key defect regions. Experiments on the self-built bearing surface defect dataset show that compared with the original YOLOv11n model, the recall rate, mAP50, and mAP @0.5:0.95 of DSRC-YOLOv11n are increased by 4.2%, 3.0%, and 2.1% respectively. The significant improvement in the recall rate effectively reduces the missed detection rate. This model effectively controls missed detections while improving detection accuracy, providing reliable technical support for automated quality inspection in industrial scenarios.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-05-27
  • 最后修改日期:2026-07-06
  • 录用日期:2026-07-27
  • 在线发布日期:
  • 出版日期:
文章二维码