Abstract:A high-speed fiber-optic transmission system based on the domestic Pango PG2L100H field-programmable gate array (FPGA) is designed and implemented. The proposed system enables the synchronous transmission of multiple heterogeneous data sources, including Gigabit Ethernet frames, TTL signals, and serial communication data, over a single optical fiber. An 8B/10B encoding/decoding scheme is employed to maintain DC balance and sufficient transition density during high-speed transmission. K28.5 comma characters are utilized for link synchronization and alignment. The RTL design, timing optimization, and board-level verification are performed using the domestic PDS development toolchain. Furthermore, the configuration and adaptation of the high-speed transceiver are experimentally verified on the domestic FPGA platform. Experimental results demonstrate that the proposed system achieves a maximum transmission rate of 6.25 Gbps. Under fiber-optic transmission tests with Gigabit Ethernet signals at 98% line-rate load and a frame length of 1518 bytes, the packet loss rate is 0%. Loopback experiments involving 40 channels of TTL signals and 2 channels of RS-422 signals confirm consistent transmit/receive data.