带P型屏蔽层的沟槽栅IGBT特性仿真对比研究
DOI:
CSTR:
作者:
作者单位:

1.兰州交通大学;2.兰州理工大学

作者简介:

通讯作者:

中图分类号:

基金项目:


A Comparative Simulation Study of P-shield Trench Gate IGBT Characteristics
Author:
Affiliation:

1.Lanzhou Jiaotong University;2.Lanzhou University of Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为应对传统带载流子存储层的沟槽栅场截止型绝缘栅双极型晶体管(CSTBT)中栅氧化层在高电场下可靠性不足的问题,文章对带有P型屏蔽层(P-shield)的CSTBT(PS-CSTBT)结构进行了仿真研究。采用Silvaco TCAD仿真软件,建立器件二维结构模型,对CSTBT与PS-CSTBT的击穿特性进行了对比研究,并系统研究了PS-CSTBT器件各内部结构浓度厚度等关键参数对器件击穿特性、转移特性以及输出特性的影响,进行了参数的折衷优化,关断特性仿真证明损耗变化在可接受范围。仿真结果表明,引入P-shield层并优化后器件的击穿电压较CSTBT提高了4.08%,优化后的器件导通稳态电流提升约149.68%。

    Abstract:

    To address the critical reliability degradation issue of gate oxide films under intense high electric field operating conditions inside conventional trench-gate field-stop insulated gate bipolar transistors with carrier storage layer (CSTBT), systematic numerical simulation and characteristic analysis are carried out for the improved CSTBT structure integrated with an embedded P-type shielding layer (P-shield), which is abbreviated as PS-CSTBT for subsequent analysis. All 2-D device models are built in Silvaco TCAD. The static breakdown characteristics of CSTBT and PS-CSTBT are compared. The effects of key structural parameters (doping concentrations and thicknesses of internal layers) on breakdown, transfer, and output characteristics are studied, and a trade-off optimization is performed. Turn-off simulation shows that the variation of turn-off loss is acceptable. Simulation results show that the breakdown voltage of devices with optimized P-shield layer increases by 4.08% compared with conventional CSTBT, and the on-state steady-state current of the optimized device increases by approximately 149.68%.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-08-04
  • 最后修改日期:2026-08-21
  • 录用日期:2026-10-09
  • 在线发布日期:
  • 出版日期:
文章二维码