Abstract:To address the inclined sidewalls, surface residues, and pattern-transfer distortion encountered during the dry etching of thin-film lithium niobate ridge waveguides, a CHF3/Ar inductively coupled plasma etching process was employed to investigate the effects of etching method, Ar flow rate, and mask structure on the etched waveguide morphology. The results show that, compared with ion beam etching, inductively coupled plasma etching improves the etching efficiency and sidewall verticality. An appropriate increase in the Ar flow rate effectively reduces sidewall striations, particulate attachments, and local surface fluctuations. Among the investigated mask structures, the Cr/SiO2 bilayer hard mask exhibits favorable etch resistance and pattern-retention capability, producing a waveguide sidewall angle of 84.1°. After wet cleaning, particulate and redeposited residues on the waveguide sidewalls are further reduced, and no resolvable Cr-related peak is detected in the energy dispersive X-ray spectrum. The developed process provides a practical reference for fabricating thin-film lithium niobate waveguides with high sidewall verticality and reduced surface residues.