基于分布式光纤传感技术的变压器温度/应变快速测量的影响因素研究
DOI:
CSTR:
作者:
作者单位:

海南电网有限责任公司

作者简介:

通讯作者:

中图分类号:

TN911.74

基金项目:

国家自然科学基金资助(62171185)。


Influencing Factors for Rapid Monitoring Method for Transformer Temperature/Strain Based on Distributed Optical Fiber Sensing Technology
Author:
Affiliation:

Hainan Power Grid Co.,Ltd

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为提升双斜坡法在基于布里渊散射的变压器绕组温度/应变快速测量中的准确性与工程适用性,系统研究了核心参数对其误差的影响机理。针对实际测量过程中光纤沿线布里渊频移波动的问题,基于高斯模型仿真产生了不同信噪比、线宽和布里渊频移分布的布里渊谱,研究了工作点频率、线宽和光纤上布里渊频移偏离程度对算法准确性的影响规律。进一步地,通过在变压器绕组表面布设传感光纤,基于实际测量的布里渊谱进行了实验验证。结果表明:工作点频率、布里渊频移偏离程度和线宽对算法准确性均有显著影响。从光纤上布里渊频移误差幅值的均值/单空间点布里渊频移幅值的均值的角度来说,最佳工作点偏离为光纤上布里渊频移的均值/单点的布里渊频移分别减去和加上半个线宽;随布里渊频移偏离系数增加布里渊频移误差幅值的均值成指数函数规律增大,布里渊频移偏离系数不宜超过0.3~0.4;随线宽增加布里渊频移误差幅值的均值正比增大。针对线宽在30 MHz~200 MHz、布里渊频移偏离系数在0~0.4范围内变化,计算获得了温度误差幅值的均值为3℃所对应的临界信噪比,并采用不同线宽和布里渊频移偏离程度下的布里渊谱验证了临界信噪比的可靠性。本文工作可为变压器绕组分布式温度/应变的高精度实时监测提供理论支撑与技术参考。

    Abstract:

    To improve the accuracy and engineering applicability of the double slope-assisted method in Brillouin scattering-based fast temperature/strain measurement for transformer windings, the influence of key factors on its error is systematically investigated. Considering the fluctuation of Brillouin frequency shift along the optical fiber in the practical measurement, Brillouin spectra with different signal-to-noise ratios, linewidths, and Brillouin frequency shift distributions are numerically generated based on the Gaussian model. The influences of the frequency of working point, linewidth, and the degree of Brillouin frequency shift deviation on the algorithm accuracy are investigated. Furthermore, a sensing optical fiber is installed on the transformer windings, and the above influences are investigated based on the measured Brillouin spectra. The results reveal that the frequency of working point, the degree of Brillouin frequency shift deviation, and the linewidth all have significant impacts on the algorithm accuracy. From the perspective of average value of/single space point"s Brillouin frequency shift error amplitude, the optimal working point’s frequency are the mean value of the Brillouin frequency shift on the optical fiber/the single points’ Brillouin frequency shift minus and plus half of the linewidth, respectively. The mean value of the Brillouin frequency shift error amplitude increases exponentially with the deviation coefficient of the Brillouin frequency shift. It is not recommended that the deviation coefficient of the Brillouin frequency shift exceed 0.3 to 0.4. The mean value of the Brillouin frequency shift error amplitude increases proportionally with linewidth. The critical signal-to-noise ratio corresponding to the mean temperature error amplitude of 3℃ is calculated for the linewidth ranging from 30 MHz to 200 MHz and the Brillouin frequency shift deviation coefficient ranging from 0 to 0.4. The reliability of the critical signal-to-noise ratio is validated using Brillouin spectra with different linewidths and deviation coefficients of Brillouin frequency shift. This work provides a theoretical support and technique reference for the real-time and accurate distributed temperature/strain measurement of transformer windings.

    参考文献
    相似文献
    引证文献
引用本文
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-08-31
  • 最后修改日期:2026-08-31
  • 录用日期:2026-09-02
  • 在线发布日期:
  • 出版日期:
文章二维码