紫外-可见光谱水质检测系统的多束LED光纤耦合研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

重庆市教委科学技术研究项目(KJ1709201);?重庆理工大学“星火计划”项目(2015XH06);?重庆理工大学研究生创新基金项目(YCX2016225);


Research on Multi-Beam LED and Fiber Coupling of UV-Visible Spectroscopy Water Quality Detection System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对紫外-可见光谱水质检测系统单个LED光源输出功率低、光束质量差的问题,提出了一种多束紫外LED光源与光纤合束耦合的结构设计方案。运用ZEMAX光学分析软件开展了仿真设计研究,针对紫外LED光源与光纤耦合发散角较大的问题,设计了非球面准直透镜,准直后发散角为0.403mrad;针对光束尺寸与光纤的匹配问题,进行了消色差双分离聚焦耦合透镜的设计。实验结果表明,合束LED光束汇聚的弥散斑的RMS尺寸为186.412μm,GEO点尺寸为290.071μm,光束中95%以上的能量集中在300μm以内,实现了多束LED光源与光纤的高效耦合。

    Abstract:

    Aiming at the problems of low output power and poor optical quality of single LED in UV-Visible water quality monitoring system, a structural design of multi-beam UV LED light source coupled with optical fiber was proposed. Optical software of ZEMAX was used to make simulations, and the aspheric collimating lens was designed for the problem of large coupling divergence angle between the UV LED light source and fiber. The divergence angle after collimation is 0.403 mrad. To solve the matching problem between the beam size and the optical fiber, the achromatic double separation and focusing lens was designed. Experimenal results show the RMS size of LED beam combination is 186.412 μm, the GEO point is 290.071 μm, and more than 95% of the energy in the beam is concentrated within 300 μm, which realizes a high coupling efficiency of multi-beam LED with the optical fiber.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-08-22
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-12-28
  • 出版日期:

漂浮通知

①《半导体光电》新近入编《中文核心期刊要目总览》2023年版(即第10版),这是本刊自1992年以来连续第10次被《中文核心期刊要目总览》收录。
②目前,《半导体光电》已入编四个最新版高质量科技期刊分级目录,它们分别是中国电子学会《电子技术、通信技术领域高质量科技期刊分级目录》(T3)、中国图象图形学学会《图像图形领域高质量科技期刊分级目录》(T3)、中国电工技术学会《电气工程领域高质量科技期刊分级目录》(T3)和中国照明学会《照明领域高质量科技期刊分级目录》(T2)。
③关于用户登录弱密码必须强制调整的说明
④《半导体光电》微信公众号“半导体光电期刊”已开通,欢迎关注